Fog Lamp Aiming Luxury Y91
Adjustment Procedure
Aim the fog lamps for proper road illumination and for safety. Check
the front fog lamp aim in the following cases:
| • | If a new front foglamp assembly is installed |
| • | If you perform any repairs which affect the front fog lamp mounts |
| • | If you perform any repairs to the vehicle, which affect the height
of the vehicle ride |
- In order to ensure accurate
vertical alignment of the front fog lamps, perform the following steps in
order to prepare the vehicle:
| • | Verify that all the components are in place on the vehicle. |
| • | Verify that the tires are inflated correctly. |
| • | Verify that mud or snow is not attached to the vehicle. |
| • | Stop all other work on the vehicle. |
| • | Make sure the fuel level is 1/2 full or more. |
| • | Bounce the vehicle up, and down in order to settle the suspension. |
| • | Place the vehicle on a level surface 7.6 m (25 ft)
from the target screen. |
| • | Measure the distance from the floor to the center of the fog lamp (5). |
| • | Use this measurement in order to mark the horizontal centerline
of the fog lamp (1) on the target screen directly in front of the vehicle. |
- Turn the front fog lamps ON.
- Locate the adjustment screw which is on the back of the fog lamps.
Use this screw in order to make the necessary adjustments.
- Adjust the fog lamp up or down until the top edge of the high-intensity
zone is in the correct area of the screen. The correct area is 102 mm
(4 in) below (2) the horizontal centerline (1).
- Turn OFF the front fog lamps.
