GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Savana 🢒 Body and Accessories 🢒 Lighting Systems 🢒 High Mount Stop Lamp Replacement

Removal Procedure

    Object Number: 325482 Size: SH
  1. Remove the screws (3) that retain the center high mounted stop lamp lens to the center high mounted stop lamp applique.
  2. Remove the center high mounted stop lamp lens (2) from the center high mounted stop lamp applique.
  3. Disconnect the bulb socket (1) from the center high mounted stop lamp lens.
  4. Remove the bulb (1) from the socket.

Installation Procedure

    Object Number: 325482 Size: SH
  1. Connect the bulb (1) into the socket.
  2. Connect the bulb socket (1) into the center high mounted stop lamp lens.
  3. Install the center high mounted stop lamp lens (2) to the center high mounted stop lamp applique.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the center high mounted stop lamp lens retaining screws (3) to the center high mounted stop lamp applique.

    5. Tighten
    Tighten the center high mounted stop lamp lens screws to 1.5 N·m (13 lb in).