Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Headlights Schematics Headlights/Daytime Running Lights (DRL) Schematics | |||
1 | Did you review the headlamp operation and perform the necessary inspections? | ||
2 |
Does the headlamp system operate normally? | Go to Testing for Electrical Intermittents in Wiring Systems | |
3 | Disconnect the headlamp switch connector. Are the lamps still illuminated? | ||
4 | Test the headlamp switch signal circuit of the headlamp switch for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | ||
5 | Disconnect the multifunction switch connector. Are the lamps still illuminated? | ||
6 | Inspect for poor connections at the harness connector of the multi-function switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | ||
7 | Inspect for poor connections at the harness connector of the headlamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | ||
8 | Repair the headlamp switch signal circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | |
9 | Replace the multi-function switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column-Standard or Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt. Did you complete the replacement? | -- | |
10 | Replace the headlamp switch. Refer to Headlamp Switch Replacement . Did you complete the replacement? | -- | |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | |
