Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics | |||
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Turn the ignition on. Are the windshield washers always on? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 |
Are the windshield washers always on? | Go to Step 4 | Go to Step 7 |
4 |
Are the windshield washers always on? | Go to Step 6 | Go to Step 5 |
5 | Test and repair the windshield wiper switch pulse delay signal circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 9 |
6 | Repair the windshield washer pump control circuit for a short to voltage. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 10 | -- |
7 | Test and repair the windshield wiper switch pulse delay signal circuit in the steering column harness for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
8 | Replace the windshield wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt or Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column-Standard. Is the repair complete? | Go to Step 10 | -- |
9 | Replace the windshield wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the repair complete? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
