Audio/Video Interface Module Replacement Luxury Y91

1. Remove the left body side-trim panel. Refer to Body Side Trim Panel Replacement - Left Side in Interior Trim.
2. Disconnect the electrical connectors from the rear-seat audio tee (RSAT) module.
3. Remove the double-sided tape from the back of the RSAT module (1) using a plastic flat-bladed tool.
4. Remove the RSAT module from the vehicle.
5. Remove all of the adhesive residue by using a razor knife and an isopropyl alcohol.

Important: Verify that all of the adhesive has been removed from the vehicle mounting surface.

1. Apply a double-sided tape to the RSAT module (1).
2. Install the RSAT module to the vehicle.
3. Connect the electrical connectors to the RSAT module.
4. Install the left body side-trim panel. Refer to Body Side Trim Panel Replacement - Left Side in Interior Trim.