Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: Use this diagnostic chart when the door lock function is inoperative when using the keyless entry transmitter. All other keyless entry functions operate normally. | ||||
1 | Did you review the Keyless Entry System operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms - Keyless Entry |
2 | Press the door lock button on the transmitter. Do the door locks operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Operate the door locks from the controls inside the vehicle. Do the door locks operate normally? | -- | Go to Step 4 | Go to Symptoms - Doors in Doors |
4 |
Important: Inspect that the keyless entry transmitter is the correct model for the vehicle remote system. A wrong model transmitter may pass this test, but will not activate the vehicle remote system.
Does a tone sound and the green light illuminate on the J 43241 after the button is pressed? | -- | Go to Step 5 | Go to Step 7 |
5 | Test the remote control door lock receiver (RCDLR) portion of the power door lock relay control circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the RCDLR. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 8 |
7 | Replace the transmitter. Refer to Transmitter Programming . Did you complete the replacement? | -- | Go to Step 9 | -- |
8 |
Important: Perform the keyless entry transmitter programming procedure when replacing the RCDLR. Replace the RCDLR. Refer to Remote Control Door Lock Receiver Replacement . Did you complete the replacement? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
