GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Savana 🢒 Body and Accessories 🢒 Body Rear End 🢒 Body Tail Lamp Filler Panel Replacement

Removal Procedure

    Object Number: 313460 Size: SH
  1. Remove the screws that retain the upper quarter panel applique to the body.
  2. Remove the nuts that retain the upper quarter panel applique to the body.
  3. Remove the upper quarter panel applique from the vehicle.

Installation Procedure

    Object Number: 313460 Size: SH
  1. Install the upper quarter panel applique to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the upper quarter panel applique retaining nut to the body.

    3. Tighten
    Tighten the nut to 6 N·m (53 lb in).

  3. Install the upper quarter panel applique screw to the body.

    4. Tighten
    Tighten the screw to 3 N·m (27 lb in).