GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 334069  Size: SH
  1. Remove the right side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the push pin rivet (4) at the rear edge of the rear door inside handle.
  3. Slide the rear door inside handle forward.
  4. Remove the rear door inside handle from the right rear door.
  5. Remove the lock rods (3) from the rear door inside handle.
  6. Remove the rear door inside handle from the right rear door.

Installation Procedure


    Object Number: 334069  Size: SH
  1. Install the rear door inside handle to the right rear door.
  2. Install the lock rods (3) to the rear door inside handle.
  3. Align the tabs on the handle with the slots in the door.
  4. Slide the inside handle rearward in order to engage the inside handle with the slots in the door.
  5. Install the push pin rivet (4) at the rear edge of the rear door inside handle.
  6. Install the right side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .