Removal Procedure
- Use 3M Release
Agent or the equivalent, if needed, in order to remove the right rear door
weather-strip from the top of the door.
- Pull the right rear door weather-strip in order to remove the
weather-strip from the channel on the side of the door.
- Remove the right rear door weather-strip and the retainers from
the bottom of the door.
- Clean the door of all of the old adhesive.
Installation Procedure
- Use the following procedure
in order to install the right rear door weather-strip to the channel on the
side of the door:
1.1. | Apply a mild soap and water solution to the right rear door weather-strip. |
1.2. | Start at the bottom of the channel in the door and slide the right
rear door weather-strip up the channel to the top of the door. |
- Install the right rear door weather-strip to the top of the door.
Use GM Weather-strip Adhesive GM P/N 12345097, or Canadian P/N
10953479 or the equivalent, if you are reusing the weather-strip.
- Press the retainers in the right rear door weather-strip into
the holes in the door.