Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Starting and Charging Schematics | |||
1 | Did you perform the Engine Electrical Diagnostic System Check? | ||
2 | Turn the ignition switch to the START position. Does the engine crank? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 | Turn the ignition switch to the START position. Does the starter motor relay click? | ||
4 |
Does the test light illuminate? | ||
5 |
Does the test light illuminate? | ||
6 |
Does the test lamp illuminate? | ||
7 |
Does the test lamp illuminate? | ||
8 | Connect a 30 amp fused jumper between the battery positive voltage circuit of the starter motor relay switch circuit and the supply voltage circuit of the starter solenoid. Does the engine crank? | ||
9 | Does the fuse in the jumper open? | ||
10 | Test the control circuit of the starter motor relay for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | ||
11 | Test the supply voltage circuit of the starter motor relay coil circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | ||
12 | Test the supply voltage circuit of the starter solenoid for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | ||
13 | Inspect for poor connections at the Starter Motor relay. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | ||
14 | Inspect for poor connection at the PNP switch harness connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. If OK perform the Park/Neutral Position Switch Adjustment 4L60-E or Park/Neutral Position Switch Adjustment 4L80-E for Automatic Transmission. Did you find and correct the condition? | ||
15 | Inspect for poor connections at the ignition switch harness connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | ||
16 | Inspect for poor connections at the starter solenoid. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | ||
17 | Repair the open or high resistance in the battery positive voltage circuit of the Starter Motor relay switch circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | |
18 | Repair the short to ground in the supply voltage circuit of the starter solenoid. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | |
19 | Replace the Starter Relay. Refer to Relay Replacement in Wiring Systems. Did you complete the replacement? | -- | |
20 | Replace the: PNP switch. Refer to Park/Neutral Position Switch Replacement 4L60-E or Park/Neutral Position Switch Replacement 4L80-E in Automatic Transmission. Did you complete the replacement? | -- | |
21 | Replace the Ignition Switch. Refer to Ignition Switch Replacement - On Vehicle in Steering Wheel and Column. Did you complete the replacement? | -- | |
22 | Replace the starter. Refer to Starter Motor Replacement . Did you complete the replacement? | -- | |
23 | Operate the system for which the symptom occurred. Did you correct the condition? | System OK | |
