GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  2. Object Number: 392774  Size: SH
  3. Remove the rear axle fill plug.

  4. Object Number: 1500  Size: SH
  5. Remove the rear axle housing cover and the gasket.
  6. 3.1. Drain the oil into a suitable container.
    3.2. Remove any gasket material from the rear axle housing and/or the rear axle housing cover.
  7. Drain the oil into a suitable container.

Installation Procedure


    Object Number: 1500  Size: SH
  1. Install the new rear axle housing gasket and the rear axle housing cover.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the rear axle housing cover bolts.
  4. Tighten
    Tighten the rear axle housing cover bolts in a crosswise pattern to 40 N·m (30 lb ft).

  5. Fill the rear axle. Use the proper fluid. Refer to Approximate Fluid Capacities and Fluid and Lubricant Recommendations in Maintenance and Lubrication.

  6. Object Number: 392774  Size: SH
  7. Install the rear axle fill plug.
  8. Tighten
    Tighten the rear axle fill plug to 33 N·m (24 lb ft).

  9. Lower the vehicle.