- Remove the key from the ignition.
- Connect the IP module
yellow 2-way connector located under the instrument panel extension.
- Install the connector position assurance (CPA) to the IP module
yellow 2-way connector.
- Install the passenger knee bolster. Refer to
Passenger Knee Bolster Replacement
in Instrument Panel, Gauges and
Console.
- Connect the steering wheel
module yellow 2-way connector located at the base of the steering column.
- Install the CPA to the steering wheel module yellow 2-way connector
located at the base of the steering column.
- Install the driver knee bolster. Refer to
Driver Knee Bolster Replacement
in Instrument Panel, Gauges and
Console.
- Install the AIR BAG Fuse to the IP fuse block.
- Staying well away from both air bags, turn ON the ignition, with
the engine OFF.
9.1. | The AIR BAG indicator will flash 7 times. |
9.2. | The AIR BAG indicator will then turn OFF. |
- Perform the
Diagnostic System Check - SIR
if the AIR BAG indicator does not operate as described.