GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Savana 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Center Roller Bracket Replacement

Removal Procedure

    Object Number: 334047 Size: SH
  1. Remove the sliding side door lower trim panel. Refer to Sliding Door Lower Trim Panel Replacement .
  2. Remove the passenger side body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side in Interior Trim.
  3. Remove the sliding side door stop. Refer to Sliding Door Stop Replacement .
  4. Remove the bolts (4) that retain the sliding side door center roller bracket (1) to the door.
  5. Remove the nuts (2) that retain the sliding side door center roller bracket (1) to the door.
  6. Slide the sliding side door center roller bracket (1) from the rear of the track.
  7. Remove the sliding side door center roller bracket (1) from the vehicle.

Installation Procedure

    Object Number: 334047 Size: SH
  1. Install the sliding side door center roller bracket (1) to the vehicle.
  2. Slide the sliding side door center roller bracket (1) into the rear of the track.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the nuts (2) in order to retain the sliding side door center roller bracket (1) to the door.

    4. Tighten
    Tighten the retaining nuts to 25 N·m (18 lb ft).

  4. Install the bolts (4) in order to retain the sliding side door center roller bracket (1) to the door.

    5. Tighten
    Tighten the retaining bolts to 25 N·m (18 lb ft).

  5. Install the sliding side door stop. Refer to Sliding Door Stop Replacement .
  6. Install the passenger side body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side in Interior Trim.
  7. Install the sliding side door lower trim panel. Refer to Sliding Door Lower Trim Panel Replacement .