GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Savana 🢒 Body and Accessories 🢒 Doors 🢒 Sliding Door Rear Lock Replacement

Removal Procedure

    Object Number: 334131 Size: SH
  1. Remove the sliding side door lower trim panel. Refer to Sliding Door Lower Trim Panel Replacement .
  2. Remove the lock rods from the sliding side door rear lock.
  3. Remove the bolts that retain the sliding side door rear lock to the sliding side door.
  4. Remove the sliding side door rear lock from the door.
  5. Remove the sliding side door rear lock from the vehicle.

Installation Procedure

    Object Number: 334131 Size: SH
  1. Install the sliding side door rear lock to the vehicle.
  2. Install the sliding side door rear lock to the door.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts in order to retain the sliding side door rear lock to the sliding side door.

    4. Tighten
    Tighten the retaining bolts to 10 N·m (89 lb in).

  4. Install the lock rods to the sliding side door rear lock.
  5. Install the sliding side door lower trim panel. Refer to Sliding Door Lower Trim Panel Replacement .