Power Window Inoperative - Driver Door. GMC Truck Savana 2002

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2002 🢒 Savana 🢒 Body and Accessories 🢒 Doors 🢒 Power Window Inoperative - Driver Door

Test Description

The number(s) below refer to the step number(s) on the diagnostic table.

The passenger power window switch on the master switch, shares common power and ground circuits with the left front window. If the passenger power window operates properly from the master switch the power and ground circuits can be presumed good.

Step	Action	Yes	No
Schematic Reference: Power Window Schematics
1	Did you review the Power Windows Description and Operation?	Go to Step 2	Go to Symptoms - Doors
2	Turn ON the ignition, with the engine OFF. Activate the driver power window from the master switch. Does the driver power window operate normally?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Operate the passenger window from the master switch. Does the passenger window operate properly?	Go to Step 4	Go to Power Windows Inoperative - All
4	Disconnect the driver power window motor. Connect a test lamp to a good ground. Probe the power window motor left front up circuit at the power window motor harness connector. Activate the left front power window switch in the up direction. Does the test lamp illuminate?	Go to Step 5	Go to Step 7
5	With the test lamp still connected to a good ground, probe the power window motor left front down circuit at the power window motor harness connector. Activate the left front power window switch in the down direction. Does the test lamp illuminate?	Go to Step 6	Go to Step 8
6	Connect a test lamp between the power window motor left front up and down circuits at the power window motor harness connector. Activate the left front power window switch in the up and down directions. Does the test lamp illuminate in both directions?	Go to Step 10	Go to Step 9
7	Test the power window motor feed left front up circuit for an open or short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 13	Go to Step 9
8	Test the power window motor feed left front down circuit for an open or short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 13	Go to Step 10
9	Inspect for poor connections at the power window master switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 13	Go to Step 11
10	Inspect for poor connections at the power window motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 13	Go to Step 12
11	Replace the left power window master switch. Refer to Front Side Door Window Switch Replacement . Did you complete the repair?	Go to Step 13	--
12	Replace the left front power window motor. Refer to Power Window Motor Replacement . Did you complete the repair?	Go to Step 13	--
13	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2