Tools Required

J 41712 Oil Pressure Sensor Socket

1. Remove the engine cover. Refer to Engine Cover Replacement .



2. Disconnect the oil pressure sensor electrical connector (1).



3. Using J 41712 or equivalent, remove the oil pressure sensor.

Notice: Refer to Fastener Notice in the Preface section.




1. Apply sealant to the threads of the oil pressure sensor. Refer to Adhesives, Fluids, Lubricants, and Sealers for the correct part number.
2. Using J 41712 or equivalent, install the oil pressure sensor.

Tighten
Tighten the oil pressure sensor to 35 N·m (26 lb ft).




3. Connect the oil pressure sensor electrical connector (1).
4. Install the engine cover. Refer to Engine Cover Replacement .