Important:
• All gasket surfaces should be free of oil or other foreign material
during assembly. • Do not use the valve rocker arm cover gasket again. • Do not remove the ignition coils and bracket from the valve rocker
arm cover unless required. • The valve rocker arm cover bolt grommets may be used again.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the valve rocker arm cover bolts to 12 N·m (106 lb in).
Tighten
Tighten the ignition coil and bracket assembly studs to 12 N·m
(106 lb in).