Removal Procedure
Notice: Refer to Engine Mounting Notice in the Preface section.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the starter. Refer to
Starter Motor Replacement
in Engine Electrical.
- Remove the right side exhaust manifold. Refer to
Exhaust Manifold Replacement - Right Side
in Engine Exhaust.
- Remove the engine mount to the frame mounting bolts.
Notice: When raising or supporting the engine for any reason, do not use a jack
under the oil pan, any sheet metal, or crankshaft balancer. Jacking against
the oil pan may cause it to crack or break.
Important: Raise the engine only enough to permit removal of the engine mount.
- Raise and suitably support the engine using adjustable (screw type) jackstands.
- Remove the engine mount to the engine mounting bolts.
- Remove the engine mount from the vehicle.
Installation Procedure
- Install the engine mount to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the engine mount to the engine mounting bolts.
Tighten
Tighten the engine mount to engine mounting bolts to 50 N·m (37 lb ft).
- Lower the engine.
- Install the engine mount to the frame mounting bolts.
Tighten
Tighten the engine mount to frame mounting bolts to 60 N·m (44 lb ft).
- Install the right side exhaust manifold. Refer to
Exhaust Manifold Replacement - Right Side
in Engine Exhaust.
- Install the starter. Refer to
Starter Motor Replacement
in Engine Electrical.
- Lower the vehicle.