Removal Procedure
- Disconnect the battery negative cable from the battery . Refer to
Battery Negative Cable Disconnection and Connection
.
- Disconnect the battery negative cable lead
from the inner fender panel.
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the battery negative cable lead
from the engine block.
- Remove the battery negative cable from the vehicle.
Installation Procedure
- Install the battery negative cable to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Connect the battery negative cable lead to the engine
block.
Tighten
Tighten the bolt that retains the battery negative cable lead to the engine
block to 25 N·m (18 lb ft).
- Lower the vehicle.
- Connect the battery negative cable lead to
the inner fender panel.
Tighten
Tighten the nut that retains the battery negative cable to the inner fender
well to 10 N·m (89 lb in).
- Connect the battery negative cable to the battery. Refer to
Battery Negative Cable Disconnection and Connection
.
Tighten
Tighten the battery negative terminal bolt to 17 N·m (13 lb ft).