GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 853308  Size: SH
  1. Remove the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement in Instrument Panel, Gages, and Console.

  2. Object Number: 923655  Size: SH
  3. Disconnect the electrical connectors (2) from the Body Control Module (BCM) (1).

  4. Object Number: 923653  Size: SH
  5. Release the tabs (2) retaining the BCM (1) to the bracket.
  6. Remove the BCM (1) from the vehicle.

Installation Procedure


    Object Number: 923652  Size: SH
  1. Install the BCM (1) into the bracket.
  2. Ensure the BCM (1) is engaged in the bracket, under the retaining tabs (2).


    Object Number: 923655  Size: SH
  3. Connect the electrical connectors (2) to the BCM (1).

  4. Object Number: 853308  Size: SH
  5. Install the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  6. If the BCM has been replaced the module will need to be programed.
  7. Program the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration .