Disc Brake Component Specifications. GMC Truck Savana 2003

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2003 🢒 Savana 🢒 Brakes 🢒 Disc Brakes 🢒 Disc Brake Component Specifications

Application	Specification
Application	Metric	English
Front Brake JH5
Rotor Discard Thickness *	27.50 mm	1.083 in
Rotor Minimum Allowable Thickness After Refinish	28.0 mm	1.102 in
Rotor Thickness New	29.0 mm	1.142 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Front Brake JH6
Rotor Discard Thickness *	36.50 mm	1.437 in
Rotor Minimum Allowable Thickness After Refinish	37.0 mm	1.457 in
Rotor Thickness New	38.0 mm	1.496 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Front Brake JH7
Rotor Discard Thickness *	36.50 mm	1.437 in
Rotor Minimum Allowable Thickness After Refinish	37.0 mm	1.457 in
Rotor Thickness New	38.0 mm	1.496 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rear Brake JH5
Rotor Discard Thickness *	28.50 mm	1.122 in
Rotor Minimum Allowable Thickness After Refinish	29.0 mm	1.142 in
Rotor Thickness New	30.0 mm	1.181 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rear Brake JH6
Rotor Discard Thickness *	27.50 mm	1.083 in
Rotor Minimum Allowable Thickness After Refinish	28.0 mm	1.102 in
Rotor Thickness New	29.0 mm	1.142 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rear Brake JH7
Rotor Discard Thickness *	28.5 mm	1.122 in
Rotor Minimum Allowable Thickness After Refinish	29.0 mm	1.142 in
Rotor Thickness New	30.0 mm	1.181 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.