Removal Procedure
- Using a flat bladed tool, remove the shoulder/seat belt guide to the guide trim cover (1).
- Remove the bolt retaining the shoulder/seat belt guide to the guide adjuster.
- Remove the shoulder/seat belt guide from the guide adjuster.
- Remove the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement .
- Remove the shoulder/seat belt guide adjuster retaining bolts from the pillar.
- Remove the shoulder/seat belt guide adjuster from the vehicle.
Installation Procedure
- Install the shoulder/seat belt guide adjuster to the vehicle.
- Install the shoulder/seat belt guide adjuster retaining bolts to the pillar.
- Install the shoulder/seat belt guide to the guide adjuster.
- Install the shoulder/seat belt guide retaining bolt to the guide adjuster.
- Install the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement .
- Install the shoulder/seat belt guide to the guide adjuster cover (1).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the shoulder/seat belt guide adjuster retaining bolts to 26 N·m (19 lb ft).
Tighten
Tighten the shoulder/seat belt guide retaining bolt to 52 N·m (38 lb ft).
