GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 820739  Size: SH
  1. Disconnect the electrical connector.
  2. Using a plastic flat bladed tool, release the double sided tape that retains the light assembly to the vehicle.

Installation Procedure


    Object Number: 820739  Size: SH
  1. Install the light assembly into the vehicle with double sided tape.
  2. Important: In order to insure a good replacement of new adhesive or of old adhesive, verify that the surface meets the following conditions:

       • The temperature of the surface is approximately 24-41°C (80-105°F).
       • The surface is clean.
       • The surface is free of wax or of oily film.

  3. Connect the electrical connector.