Schematic Reference: Radio/Audio System Schematics

Did you perform the Diagnostic System Check - Radio/Audio System?

Go to Step 2

Go to Diagnostic System Check - Radio/Audio System

1. Turn ON the ignition, with the engine OFF.
2. Turn ON the radio.

Does the radio operate normally?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Reprogram the Radio. Refer to Service Programming System (SPS) in Programming.
2. Turn OFF the ignition.
3. Turn ON the ignition, with the engine OFF.
4. Turn ON the radio.

Does the radio display CAL ERR?

Go to Step 4

Go to Step 5

Important: Reprogram the radio. Refer to Service Programming System (SPS) in Programming.

Replace the radio. Refer to Radio Replacement .

Did you complete the replacement?

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2