GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 871215  Size: SH
  1. Remove the instrument panel (I/P) upper trim panel. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages, and Console.
  2. Disconnect the electrical connector (2) from the door lock receiver (1).
  3. Disengage the remote control door lock receiver (1) from the door lock receiver bracket.
  4. Remove the door lock receiver.

Installation Procedure


    Object Number: 871215  Size: SH
  1. Perform the following to install the door lock receiver (1) to the door lock receiver bracket.
  2. Slide the tab on door lock receiver (1) into the door lock receiver bracket and snap into place to secure.

  3. Connect the electrical connector (1) to the door lock receiver (2).
  4. Install the I/P trim panel. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages, and Console.