Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Seat Belt Schematics Connector End View Reference: Seat Belt Connector End Views | |||
1 | Did you review the Diagnostic Starting Point - Seat Belts? | Go to Step 2 | |
2 |
Does the seat belt indicator operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the scan tool indicate that the seat belt is buckled? | Go to Step 4 | Go to Step 5 |
4 | Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console. Did you complete the replacement? | Go to Step 8 | -- |
5 |
Did you find and correct the condition? | Go to Step 8 | Go to Step 6 |
6 | Test the low reference circuit of the seat belt switch - driver for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 8 | Go to Step 7 |
7 | Replace the seat belt switch - driver. Refer to Front Seat Belt Buckle Replacement . Did you complete the replacement? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |