Rocker Panel Molding Replacement Luxury Y91

1. Remove the push pin retainers from the bottom of the rocker panel molding.
2. Tilt the lower portion of the rocker panel molding out away from the vehicle.
3. In order to remove the rocker panel molding from the vehicle, carefully lift up the molding.

Important: In order to install the rocker panel molding to the retaining channel, pull the lower portion of the rocker panel molding away from the vehicle.

1. Install the rocker panel molding to the vehicle.

Important: Press the rocker panel molding completely into the channel in order to remove any air gaps.

2. Install the push pin retainers. Gently push up on the rocker panel molding until the rocker panel molding is flush with the metal retaining-channel.