GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Savana 🢒 Body and Accessories 🢒 Body Front End 🢒 Front Fender Extension Replacement

Removal Procedure

    Object Number: 314973 Size: SH
  1. Remove the bolt (2) retaining the front fender extension (3) to the body.
  2. Remove the bolt (2) retaining the front fender extension (3) to the rocker panel.
  3. Remove the front fender extension (3) from the body.

Installation Procedure

    Object Number: 314973 Size: SH
  1. Install the front fender extension (3) to the body.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts (2) in order to retain the front fender extension (3) to the body.

    3. Tighten
    Tighten the bolts to 11 N·m (97 lb in).

  3. Install the bolt in order to retain the front fender extension to the rocker panel.

    4. Tighten
    Tighten the bolt to the rocker panel to 2 N·m (18 lb in).