GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Savana 🢒 Body and Accessories 🢒 Doors 🢒 Rear Door Inside Handle Bezel Replacement

Removal Procedure

    Object Number: 879685 Size: SH
  1. Remove the screw (2) from the inside door handle bezel.
  2. Press the retaining tab on the inside door handle bezel (1) in order to release the inside door handle bezel (1) from the front door trim plate.
  3. Remove the inside door handle bezel (1) from the vehicle.

Installation Procedure

    Object Number: 879685 Size: SH
  1. Align the inside door handle bezel (1) to the front door trim plate.
  2. Press the door handle bezel towards the door trim panel in order to engage the retaining tab.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bezel screw (2).

    4. Tighten
    Tighten the bezel screw to 1.9 N·m (17 lb in)