Back Body Opening Upper Applique Replacement Old

1. Remove the upper quarter panel applique.
2. Remove the center high mounted stoplamp lens. Refer to High Mount Stop Lamp Replacement .



3. Remove the nuts that retain the center high mounted stoplamp applique to the body.
4. Remove the screws that retain the center high mounted stoplamp applique to the body.
5. Remove the center high mounted stoplamp applique from the vehicle.

1. Install the center high mounted stoplamp applique to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the center high mounted stoplamp applique retaining screws to the body.

Tighten
Tighten the screws that retain the center high mounted stoplamp applique to 2 N·m (18 lb in).

3. Install the center high mounted stoplamp applique retaining nuts to the body.

Tighten
Tighten the nuts that retain the center high mounted stoplamp applique to 6 N·m (53 lb ft).

4. Install the center high mounted stoplamp lens. Refer to High Mount Stop Lamp Replacement .



5. Install the upper quarter panel applique.