Removal Procedure
- Use 3M General Purpose Adhesive Cleaner
3M P/N 08987 or the equivalent, if needed, in order to remove the right
rear door weatherstrip from the top of the door.
- Pull the right rear door weatherstrip in order to remove the weatherstrip
from the channel on the side of the door.
- Remove the right rear door weatherstrip and the retainers from the bottom
of the door.
- Clean the door of all of the old adhesive.
Installation Procedure
- Apply a mild soap and water solution to
the right rear door weatherstrip.
- Start at the bottom of the channel in the door and slide the right rear
door weatherstrip up the channel to the top of the door.
- Install the right rear door weatherstrip to the top of the door. Use GM
Weatherstrip Adhesive GM P/N 12345097, (Canadian P/N 10953479)
or the equivalent, if you are reusing the weatherstrip.
- Press the retainers in the right rear door weatherstrip into the holes
in the door until fully seated.