Removal Procedure
Notice: Refer to Power Steering Hose Disconnected Notice in the Preface section.
- Install a drain pan under the vehicle.
- Siphon the fluid from the reservoir to prevent excessive spillage.
- Remove the reservoir inlet hose (3) from the power brake booster (2).
- Remove the reservoir inlet hose (3) from the reservoir.
- Remove the reservoir inlet hose from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Route the hose in the same position the hose occupied prior to removal.
- Install the reservoir inlet hose (3) to the reservoir.
- Install the reservoir inlet hose (3) to the power brake booster (2).
- Bleed the power steering system. Refer to
Power Steering System Bleeding
.
- Remove the drain pan from under the vehicle.