• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• | Diagnostic Procedure Instructions provide an overview of each diagnostic category. |
Circuit | Short to Ground | Open/High Resistance | Short to Voltage | Signal Performance |
---|---|---|---|---|
Auxiliary Heater Coolant Sensor Supply Voltage Circuit | B0455 00 | B0457 00 | -- | -- |
Auxiliary Heater Coolant Sensor Ground Voltage Circuit | -- | B0457 00 | B0457 00 | -- |
The fuel operated heater uses an auxiliary heater coolant sensor to measure the coolant temperature.
Engine is running.
Fuel operated heater has recognized out of range condition for more than 2.5 seconds.
Fuel operated heater is disabled.
DTC must be cleared with a scan tool.
Cooling System Connector End Views
Start the vehicle. Observe the coolant heater sensor scan tool parameter . The scan tool parameter should display between 0.09-4.9 volts.
⇒ | If the resistance vs temperature reading is not within 5 percent, replace the coolant heater sensor. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.