Battery Tray Replacement Primary

1. Remove the coolant recovery reservoir bolt and reposition the reservoir.



2. Disconnect the battery negative cable from the battery negative terminal. Refer to Battery Negative Cable Disconnection and Connection .
3. Disconnect the battery positive cable from the battery positive terminal. Refer to Battery Positive Cable Replacement .
4. Remove the battery limiter from the vehicle if equipped.
5. Remove the fender brace.



6. Remove the battery hold-down bolt and retainer.
7. Remove the battery.



8. Remove the battery tray bolts.
9. Disconnect the vacuum hoses.
10. Disconnect the vacuum pump electrical connector.
11. Remove the battery tray from the vehicle.

1. Install the battery tray to the vehicle.
2. Connect the vacuum pump hoses and electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the battery tray bolts.

Tighten
Tighten the battery tray bolts to 9 N·m (80 lb in).




4. Install the battery.
5. Install the battery hold-down retainer and bolt.

Tighten
Tighten the battery hold-down retainer bolt to 18 N·m (12 lb ft).

6. Install the fender brace.
7. Install the battery limiter to the vehicle if equipped.



8. Install the positive battery cable to the battery.

Tighten
Tighten the terminal bolt to 17 N·m (13 lb ft).

9. Install the battery negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection .

Tighten
Tighten the terminal bolt to 17 N·m (13 lb ft).

10. Install the coolant recovery reservoir.

Tighten
Tighten the bolt to 11 N·m (97 lb in).