Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the rear tire and wheel. Refer to Tire and Wheel Removal and Installation.

1

Rear Stabilizer Shaft Link Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
95 N·m (70 lb ft)

2

Rear Stabilizer Shaft Bolt

3

Rear Stabilizer Shaft Link Nut

Tighten
53 N·m (39 lb ft)

Tip
Use an open end wrench to hold the stud while torquing to specifications.

4

Stabilizer Shaft Link