Preliminary Procedure

1. Open and support the hood.
2. Place a clean container under the work area prior to removing the windshield washer pump hose from the pump.

1

Front End Panel Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Windshield Washer Front End Panel Nut

3

Windshield Washer Pump Electrical Connector

Tip
Disconnect the electrical connector and position out of the way.

4

Windshield Washer Pump Hose

5

Windshield Washer Solvent Container

Tip
Lift the container from the locating holes in the front end lower panel support.