Steering Wheel Control Switch Assembly Replacement. GMC Truck Savana 2008

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2008 🢒 Savana 🢒 Driver Information and Entertainment 🢒 Secondary and Configurable Customer Controls 🢒 Steering Wheel Control Switch Assembly Replacement

Callout	Component Name
Preliminary Procedure Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
1	Steering Wheel Trim Plate Screw (Qty: 4) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	Steering Wheel Trim Plate (Qty: 2)
3	Radio Control Screw (Qty: 6) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
4	Radio Control Switch Assembly Procedure Disconnect the electrical connector. Make sure the steering wheel control switches are properly seated to the steering wheel trim cover during installation.
5	Cruise Control Switch Assembly Procedure Disconnect the electrical connector. Make sure the steering wheel control switches are properly seated to the steering wheel trim cover during installation.