GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Savana 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Upper Pillar Garnish Molding Replacement

Removal Procedure
  1. Remove the front seat belt from the front seat belt height adjuster. Refer to Front Seat Belt Retractor Replacement .
  2. Open the access door and remove the screw, if equipped.

    3. Object Number: 326822 Size: SH
  3. Grasp and gently pull the garnish molding in order to release the retaining clips.
  4. Remove the front door upper pillar garnish molding from the vehicle.
  5. Inspect the front door upper pillar garnish molding for broken or missing retaining clips.

Installation Procedure

    Object Number: 326822 Size: SH
  1. Install the front door upper pillar garnish molding to the vehicle.
  2. Align the retainers to the body and press the garnish molding in order to engage the retaining.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screw.

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  4. Install the front seat belt to the front seat belt height adjuster. Refer to Front Seat Belt Retractor Replacement .