For 1990-2009 cars only
Removal Procedure
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the drain plug and drain the engine oil in a suitable container.
- Remove the oil filter.
- Inspect to ensure the engine oil filter gasket is removed.
Installation Procedure
- Lubricate the oil filter gasket with clean engine oil.
- Install the oil filter and tighten to 30 N·m (22 lb ft).
- Install the drain plug and tighten to 25 N·m (18 lb ft).
- Lower the vehicle.
- Fill the engine with the proper capacity and quality of engine oil. Refer to Approximate Fluid Capacities.
- Operate the engine, check for leaks, and oil pressure.
Caution: Refer to Fastener Caution in the Preface section.
