Special Tools

J 41712 Oil Pressure Sensor Socket

1. Remove the engine cover. Refer to Engine Cover Replacement.



2. Disconnect the oil pressure sensor electrical connector (1).



3. Using J 41712 or equivalent, remove the oil pressure sensor.

1. Apply sealant to the threads of the oil pressure sensor. Refer to Adhesives, Fluids, Lubricants, and Sealers for the correct part number.

Caution: Refer to Fastener Caution in the Preface section.

2. Using J 41712 or equivalent, install the oil pressure sensor and tighten to 35 N·m (26 lb ft).



3. Connect the oil pressure sensor electrical connector (1).
4. Install the engine cover. Refer to Engine Cover Replacement.