For 1990-2009 cars only
Removal Procedure
- Remove the screws retaining the fuel filter pipe to the body.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Use jack stands in order to support the body of the vehicle.
- Release the brake line retainers closest to the first body mount (2) in order to ensure that the brake lines will not bend when you lower the frame.
- Loosen all the body mount bolts (5). Do not remove the bolts.
- Remove the bolt (5) from the body mount.
- Lower the frame slightly.
- Remove the body mount from the frame.
Installation Procedure
- Install the body mount (2) to the frame.
- Raise the frame.
- Install the bolt (5) to the body mount.
- Install the body mount bolts (5) and tighten to 140 N·m (103 lb ft).
- Install the brake line retainers.
- Remove the safety stands.
- Lower the vehicle.
- Install the screws retaining the fuel filler pipe to the body.
Caution: Refer to Fastener Caution in the Preface section.
