GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Savana - AWD 🢒 Body and Accessories 🢒 Frame and Underbody 🢒 Rear Tie Down Bracket Replacement

Removal Procedure

    Object Number: 829099 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tow hooks to the frame mounting nuts.
  3. Remove the tow hook from the frame.
  4. Remove the tow hook bolts from the frame.

Installation Procedure

    Object Number: 829099 Size: SH
  1. Install the tie down bracket bolts to the frame.
  2. Install the tie down bracket to the frame.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the tie down bracket to the frame mounting nuts.

    4. Tighten
    Tighten the nuts to 88 N·m (65 lb ft).

  4. Lower the vehicle.