GM Service Manual Online
For 1990-2009 cars only

    Object Number: 63233  Size: SH

    Important: 

       • When using the valve lifters again, install the lifters to their original locations.
       • If camshaft replacement is required, the valve lifters must also be replaced.

  1. Lubricate the valve lifters and engine block valve lifter bores with clean engine oil.
  2. Insert the valve lifters into the lifter guides.
  3. Align the flat area on the top of the lifter with the flat area in the lifter guide bore. Push the lifter completely into the guide bore.


    Object Number: 1272826  Size: SH
  4. Install the valve lifters and guide assembly to the engine block.
  5. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the valve lifter guide bolt (211).
  7. Tighten
    Tighten the valve lifter guide bolt to 12 N·m (106 lb in).