Removal Procedure
- Remove the engine cover. Refer to
Engine Cover Replacement
.
Remove the engine wiring harness ground bolt.
- Reposition the engine wiring harness ground and ground strap.
- Remove the ground strap nut from the stud at the front of dash.
- Remove the ground strap from the stud.
Installation Procedure
- Install the ground strap to the stud.
Notice: Refer to Fastener Notice in the Preface section.
- Install the ground strap nut to the stud at the front of dash.
Tighten
Tighten the nut to 9 N·m (80 lb in).
- Position the ground strap and engine wiring harness ground.
- Install the engine wiring harness ground bolt.
Tighten
Tighten the bolt to 16 N·m (12 lb ft).
- Install the engine cover. Refer to
Engine Cover Replacement
.