Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Audible Warnings Schematics Connector End View Reference: Instrument Panel, Gages, and Console Connector End Views or Computer/Integrating Systems Connector End Views in Computer/Integrating Systems DEFINITION: The chime sounds with the driver's door open. | ||||
1 | Did you perform the Diagnostic System Check - Vehicle? | -- | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 | Do any indicators illuminate when the chime sounds? | -- | Go to Step 3 | |
3 |
Does the chime sound? | -- | Go to Step 4 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
4 | Disconnect the body control module (BCM). Does the chime sound? | -- | Go to Step 5 | Go to Step 6 |
5 | Is the vehicle equipped with a chime module (UL5)? | -- | Go to Step 10 | Go to Step 11 |
6 |
Does the Parklamp Switch parameter display Inactive? | -- | Go to Step 7 | Go to Diagnostic Trouble Code (DTC) List - Vehicle in Vehicle DTC Information |
7 |
Does the Driver Door Ajar parameter display Inactive? | -- | Go to Step 8 | Go to Courtesy Lamps Always On in Lighting Systems |
8 |
Does the test lamp illuminate? | -- | Go to Step 9 | Go to Step 12 |
9 | Test the key in ignition switch signal circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 13 |
10 | Inspect for poor connections at the harness connector of the chime module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 14 |
11 | Inspect for poor connections at the harness connector of the radio. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 15 |
12 | Inspect for poor connections at the harness connector of the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 16 |
13 | Inspect for poor connections at the harness connector of the ignition key alarm switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 17 |
14 | Replace the chime module. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming. Did you complete the replacement? | -- | Go to Step 18 | -- |
15 | Replace the radio. Refer to Radio Replacement in Entertainment. Did you complete the replacement? | -- | Go to Step 18 | -- |
16 | Replace the BCM. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming. Did you complete the replacement? | -- | Go to Step 18 | -- |
17 | Replace the ignition key alarm switch. Refer to Ignition and Start Switch Replacement in Steering Wheel and Column. Did you find and correct the condition? | -- | Go to Step 18 | -- |
18 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
