• | J 43631 Ball Joint Remover |
• | J 45851 Ball Joint Separator Protector Adapters |
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the nuts to 175 N·m (129 lb ft).
Tighten
Tighten the nut to 50 N·m (37 lb ft).
Tighten
• | Tighten the brake hose bracket to steering knuckle bolt to 10 N·m (88 lb in). |
• | Tighten the brake hose bracket to upper control arm bolt to 10 N·m (88 lb in). |