GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 333921  Size: SH
  1. Use 3M General Purpose Adhesive Cleaner 3M P/N 08987 or the equivalent, if needed, in order to remove the right rear door weatherstrip from the top of the door.
  2. Pull the right rear door weatherstrip in order to remove the weatherstrip from the channel on the side of the door.
  3. Remove the right rear door weatherstrip and the retainers from the bottom of the door.
  4. Clean the door of all of the old adhesive.

Installation Procedure


    Object Number: 333921  Size: SH
  1. Apply a mild soap and water solution to the right rear door weatherstrip.
  2. Start at the bottom of the channel in the door and slide the right rear door weatherstrip up the channel to the top of the door.
  3. Install the right rear door weatherstrip to the top of the door. Use GM Weatherstrip Adhesive GM P/N 12345097, (Canadian P/N 10953479) or the equivalent, if you are reusing the weatherstrip.
  4. Press the retainers in the right rear door weatherstrip into the holes in the door until fully seated.