Removal Procedure
- Remove the sliding door trim panel. Refer to
Sliding Rear Side Door Trim Panel Replacement
.
- Open the door partially and support the door.
- Remove the bolts (4) that retain the sliding side door center roller bracket (1) to the door.
- Remove the nuts (2) that retain the sliding side door center roller bracket (1) to the door.
- Slide the sliding side door center roller bracket (1) from the rear of the track.
- Remove the sliding side door center roller bracket (1) from the vehicle.
Installation Procedure
- Install the sliding side door center roller bracket (1) to the vehicle.
- Slide the sliding side door center roller bracket (1) into the rear of the track.
Notice: Refer to Fastener Notice in the Preface section.
- Install the nuts (2) in order to retain the sliding side door center roller bracket (1) to the door.
Tighten
Tighten the retaining nuts to 25 N·m (18 lb ft).
- Install the bolts (4) in order to retain the sliding side door center roller bracket (1) to the door.
Tighten
Tighten the retaining bolts to 25 N·m (18 lb ft).
- Install the sliding door trim panel. Refer to
Sliding Rear Side Door Trim Panel Replacement
.
- Close the door and inspect the operation of the door.