GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the sliding side door lower trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement .
  2. Disconnect the electrical connector (5) from the sliding side door lock (1).

  3. Object Number: 403463  Size: SH
  4. Remove the wiring harness retainers (2) from the sliding side door.
  5. Remove the rivets (4), that retain the electrical contacts to the sliding side door, using an appropriate drill and drill bit.
  6. Remove the wiring harness (3) from the sliding side door.

Installation Procedure


    Object Number: 403463  Size: SH
  1. Install the wiring harness (3) to the sliding side door.
  2. Install the rivets (4), that retain the electrical contacts to the sliding side door, with a rivet gun.
  3. Install the wiring harness retainers (2) to the sliding side door.
  4. Connect the electrical connector (5) to the sliding side door lock (1).
  5. Install the sliding side door lower trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement .