GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the sliding side door check assembly. Refer to Sliding Door Check Replacement .
  2. Remove the sliding side door lower roller bracket. Refer to Rear Side Door Lower Roller Bracket Replacement .

  3. Object Number: 334054  Size: SH
  4. Remove the bolts (2) that retain the sliding side door lower track (1) to the vehicle.
  5. Remove the sliding side door lower track (1) from the vehicle.

Installation Procedure


    Object Number: 334054  Size: SH
  1. Install the sliding side door lower track (1) to the vehicle.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts (2) that retain the sliding side door lower track (1) to the vehicle.
  4. Tighten
    Tighten the bolts to 11 N·m (97 lb in).

  5. Install the sliding side door lower roller bracket. Refer to Rear Side Door Lower Roller Bracket Replacement .
  6. Install the sliding side door check assembly. Refer to Sliding Door Check Replacement .